Jiangsu Qiangli Machinery Co.,Ltd
Jiangsu Qiangli Machinery Co.,Ltd
Add to Cart
Semi-automatic tool grinder machine is designed for cutting PCD, PCBN, CVD, tungsten carbide
Main Technical Parameters:
1. Spindle and Grinding Wheel
| Diameter of Grinding wheel | 150mm | |
| Direct Drive Spindle with Water Cooling | 3KW | |
| RPM of Grinding Spindle | 0～3,000RPM | |
| Changeable Clearance Angle | -5°~25° | |
| Grinding wheel center hole | 40mm | |
| Spindle Center Height | 150mm | |
2. Grinding Wheel Oscillation System(X Axis)
| PLC Numerical Controlled Oscillation and Control on the Panel | ||
| Max. Oscillation Range | 30mm | |
| Max. Oscillation Frequency | 60times/min | |
3. CCD Monitoring System
| Max Magnification of Optical Microscope | 4 times | |
| Magnification of CCD Measuring System | 80times | |
| Industrial Displayer | 15“ | |
| CCD Image Resolution | 1280*1024 | |
4. Feed and Rotation System
| Compressor of Air Braking on Rotation Axis | 6bar | |
| Tool rotation (B axis) controlled by PLC. Can be switched to manual mode. | LCD input | |
| Horizontal Transverse (Y Axis) Driven by Air | 70mm | |
| Linear Encoder Resolution (X Axis and Y Axis) | 0.001mm | |
5. Power Supply and Dimensions
| Coolant Tank with Filter Paper | about70L | |
| Electrical Supply | 12Kw | |
| Voltage Requested | 380V/Three phase /50Hz | |
| Overall Dimensions L╳W╳H | 1700╳1150╳1970mm | |
| Weight With Coolant Tank | 2000Kg | |
Technology breakthrough:
1. Dual-position design: the machine's two stations, can easily operate and observe. Positive station (axial grinding wheel) to avoid splashing water; side to facilitate the cutting knife and knife and other special tools, grinding.
2. Vertical axis optimization: the micro-adjustment of the vertical axis into the work table in the fixture, greatly enhanced the stability and rigidity of the equipment.